?
Haze - A mass concentration of surface imperfections, often giving a hazy appearance to the wafer.
霧度?-?晶圓片表面大量的缺陷，常常表現為晶圓片表面呈霧狀。
?
Hole - Similar to a positive charge, this is caused by the absence of a valence electron.
空穴?-?和正電荷類似，是由缺少價電子引起的。?
?
Ingot - A cylindrical solid made of polycrystalline or single crystal silicon from which wafers are cut.
晶錠?-?由多晶或單晶形成的圓柱體，晶圓片由此切割而成。?
?
Laser Light-Scattering Event - A signal pse that locates surface imperfections on a wafer.
激光散射?-?由晶圓片表面缺陷引起的脈沖信號。?
?
Lay - The main direction of surface texture on a wafer.
層?-?晶圓片表面結構的主要方向。?
?
Light Point Defect (LPD) (Not preferred; see localized light-scatterer)
光點缺陷(LPD)?（不推薦使用，參見“局部光散射”）?
?
Lithography - The process used to transfer patterns onto wafers.
光刻?-?從掩膜到圓片轉移的過程。?
?
Localized Light-Scatterer - One feature on the surface of a wafer, such as a pit or a scratch that scatters light. It is also called a light point defect.
局部光散射?-?晶圓片表面特征，例如小坑或擦傷導致光線散射，也稱為光點缺陷。?
?
Lot - Wafers of similar sizes and characteristics placed together in a shipment.
批次?-?具有相似尺寸和特性的晶圓片一并放置在一個載片器內。?
?
Majority Carrier - A carrier, either a hole or an electron that is dominant in a specific region, such as electrons in an N-Type area.
多數載流子?-?一種載流子，在半導體材料中起支配作用的空穴或電子，例如在N型中是電子。
?
Mechanical Test Wafer - A silicon wafer used for testing purposes.
機械測試晶圓片?-?用于測試的晶圓片。?
?
Microroughness - Surface roughness with spacing between the impurities with a measurement of less than 100 μm.
微粗糙?-?小于100微米的表面粗糙部分。?
?
Miller Indices, of a Crystallographic Plane - A system that utilizes three numbers to identify plan orientation in a crystal.
Miller索指數?-?三個整數，用于確定某個并行面。這些整數是來自相同系統的基本向量。?
?
Minimal Conditions or Dimensions - The allowable conditions for determining whether or not a wafer is considered acceptable.
最小條件或方向?-?確定晶圓片是否合格的允許條件。
?
Minority Carrier - A carrier, either a hole or an electron that is not dominant in a specific region, such as electrons in a P-Type area.
少數載流子?-?在半導體材料中不起支配作用的移動電荷，在P型中是電子，在N型中是空穴。?
?
Mound - A raised defect on the surface of a wafer measuring more than 0.25 mm.
堆垛?-?晶圓片表面超過0.25毫米的缺陷。?
?
Notch - An indent on the edge of a wafer used for orientation purposes.
凹槽?-?晶圓片邊緣上用于晶向定位的小凹槽。?
?
Orange Peel - A roughened surface that is visible to the unaided eye.
桔皮?-?可以用肉眼看到的粗糙表面?
?
Orthogonal Misorientation -
直角定向誤差?-?
?
Particle?-?A?small?p*不良詞語
*e of material found on a wafer that is not connected with it.
顆粒?-?晶圓片上的細小物質。?
?
Particle Counting - Wafers that are used to test tools for particle contamination.
顆粒計算?-?用來測試晶圓片顆粒污染的測試工具。?
?
Particate Contamination - Particles found on the surface of a wafer. They appear as bright points when a collineated light is shined on the wafer.
顆粒污染?-?晶圓片表面的顆粒。?
?
Pit - A non-removable imperfection found on the surface of a wafer.
深坑?-?一種晶圓片表面無法消除的缺陷。?
?
Point Defect - A crystal defect that is an impurity, such as a lattice vacancy or an interstitial atom.
點缺陷?-?不純凈的晶缺陷，例如格子空缺或原子空隙。?
?
Preferential Etch -
優先蝕刻?-?
?
Premium Wafer - A wafer that can be used for particle counting, measuring pattern resolution in the photolithography process, and metal contamination monitoring. This wafer has very strict specifications for a specific usage, but looser specifications than the prime wafer.
測試晶圓片?-?影印過程中用于顆粒計算、測量溶解度和檢測金屬污染的晶圓片。對于具體應用該晶圓片有嚴格的要求，但是要比主晶圓片要求寬松些。?
?
Primary Orientation Flat - The longest flat found on the wafer.
主定位邊?-?晶圓片上最長的定位邊。?
?
Process Test Wafer - A wafer that can be used for processes as well as area cleanliness.
加工測試晶圓片?-?用于區域清潔過程中的晶圓片。?
?
Profilometer - A tool that is used for measuring surface topography.
表面形貌劑?-?一種用來測量晶圓片表面形貌的工具。?
?
Resistivity (Electrical) - The amount of difficulty that charged carriers have in moving throughout material.
電阻率（電學方面）?-?材料反抗或?qū)闺姾稍谄渲型ㄟ^的一種物理特性。?
?
Required - The minimum specifications needed by the customer when ordering wafers.
必需?-?訂購晶圓片時客戶必須達到的最小規格。
?
Roughness - The texture found on the surface of the wafer that is spaced very closely together.
粗糙度?-?晶圓片表面間隙很小的紋理。?
?
Saw Marks - Surface irregarities
鋸痕?-?表面不規則。?
?
Scan Direction - In the flatness calcation, the direction of the subsites.
掃描方向?-?平整度測量中，局部平面的方向。?
?
Scanner Site Flatness -
局部平整度掃描儀?-?
?
Scratch - A mark that is found on the wafer surface.
擦傷?-?晶圓片表面的痕跡。?
?
Secondary Flat - A flat that is smaller than the primary orientation flat. The position of this flat determines what type the wafer is, and also the orientation of the wafer.
第二定位邊?-?比主定位邊小的定位邊，它的位置決定了晶圓片的類型和晶向。?
?
Shape -
形狀?-?
?
Site - An area on the front surface of the wafer that has sides parallel and perpendicar to the primary orientation flat. (This area is rectangar in shape)
局部表面?-?晶圓片前面上平行或垂直于主定位邊方向的區域。?
?
Site Array - a neighboring set of sites
局部表面系列?-?一系列的相關局部表面。?
?
Site Flatness -
局部平整?-?
?
Slip - A defect pattern of small ridges found on the surface of the wafer.
劃傷?-?晶圓片表面上的小皺造成的缺陷。?
?
Smudge - A defect or contamination found on the wafer caused by fingerprints.
污跡?-?晶圓片上指紋造成的缺陷或污染。?
?
Sori -
Striation - Defects or contaminations found in the shape of a helix.
條痕?-?螺紋上的缺陷或污染。?
?
Subsite, of a Site - An area found within the site, also rectangar. The center of the subsite must be located within the original site.
局部子表面?-?局部表面內的區域，也是矩形的。子站中心必須位于原始站點內部。?
?
Surface Texture - Variations found on the real surface of the wafer that deviate from the reference surface.
表面紋理?-?晶圓片實際面與參考面的差異情況。?
?
Test Wafer - A silicon wafer that is used in manufacturing for monitoring and testing purposes.
測試晶圓片?-?用于生產中監測和測試的晶圓片。?
?
Thickness of Top Silicon Film - The distance found between the face of the top silicon film and the surface of the oxide layer.
頂部硅膜厚度?-?頂部硅層表面和氧化層表面間的距離。?
?
Top Silicon Film - The layer of silicon on which semiconductor devices are placed. This is located on top of the insating layer.
頂部硅膜?-?生產半導體電路的硅層，位于絕緣層頂部。?
?
Total Indicator Reading (TIR) - The smallest distance between planes on the surface of the wafer.
總計指示劑數(TIR)?-?晶圓片表面位面間的最短距離。?
?
Virgin Test Wafer - A wafer that has not been used in manufacturing or other processes.
原始測試晶圓片?-?還沒有用于生產或其他流程中的晶圓片。?
?
Void?-?The?lack?of?any?sort?of?bond?(partic*不良詞語*arly?a?chemical?bond)?at?the?site?of?bonding.?
無效?-?在應該綁定的地方?jīng)]有綁定（特別是化學綁定）。
?
Waves - Curves and contours found on the surface of the wafer that can be seen by the naked eye.
波浪?-?晶圓片表面通過肉眼能發現的彎曲和曲線。?
?
Waviness - Widely spaced imperfections on the surface of a wafer.
波紋?-?晶圓片表面經常出現的缺陷。
?